ShockWatch ImpactManager Parts & Replacement Parts
ImpactManager SC
| Part Number |
Description |
| SC 1000 |
Powered by internal 9-volt (V) battery. Self
contained. No wiring required. Internal alarm sounds upon Impact. Usually
mounted on exterior of vehicle. |
| SC 1010 |
Powered by lift truck. One wire connected to power
source. Internal alarm sounds upon impact. Usually mounted on exterior of
vehicle. |
| SC 1040 |
Powered by internal 9-V battery. One wire connected
to device to be activated upon impact (forklift horn, light, external horn,
etc.). Usually mounted on exterior of vehicle |
| SC 1060 |
Powered by lift truck. One wire connected to power
source; additional wire connected to device requiring activation (see SC1040
above). Usually mounted on exterior of vehicle. |
| SC 1080 |
Powered by lift truck. One wire to power source;
one wire to activation device; third wire (15 ft length) to remote control
panel (1.5" x 3.0") housing keyswitch and test button. Unit is
mounted inside lift truck leaving only keyswitch and test button exposed. |
* When ordering, please specify sensor type (A, B or M) you require.
ImpactManager ID
| Part Number |
Description |
| ID1300 |
Data transferred manually via manager's key
(iButton) or optional Dataranger to computer running Shockmate software. |
ImpactManager ID with Card Reader
| Part Number |
Description |
| ID1300-MS |
Standard ImpactManager ID unit with Magnetic Stripe
Reader |
| ID1300-IR |
Standard ImpactManager ID unit with Infrared Barcode
Reader |
| ID1300-PR |
Standard ImpactManager ID unit with Proximity Card
Reader |
ImpactManager RF: 900-MHz Model
ImpactManager RF: 900-MHz Model |
| Part Number |
Description |
| RF1300 |
Impact detection. Data transferred automatically
via radio Frequency (RF) link to computer running Shockmate software. |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (vertical or horizontal)
you require. Each unit includes 3 green driver keys free of charge.
ImpactManager RF: 900-MHz Model
with Card Reader |
| Part Number |
Description |
| RF1300-MS |
Standard ImpactManager RF unit with Magnetic Stripe
Reader |
| RF1300-IR |
Standard ImpactManager RF unit with Infrared Barcode
Reader |
| RF1300-PR |
Standard ImpactManager RF unit with Proximity Card
Reader |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (vertical or horizontal)
you require. Uses a Standard ImpactManager RF Base Station.
ImpactManager RF: 900-MHz Model
Base Station/Antenna |
| Part Number |
Description |
| RF1501 |
Minimum of one base station required per
facility |
| RF1506 |
900-MHZ USB Base Station |
ImpactManager RF:
920-928.2-MHz Australian Model
ImpactManager RF: 920-928.2-MHz
Australian Model |
| Part Number |
Description |
| RF1300-AUST |
ImpactManager RF with Australian Radio
(920-928.2 MHz) |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (vertical or horizontal)
you require. Each unit includes 3 green driver keys free of charge. Uses a
Standard ImpactManager Software kit and Base Station.
ImpactManager RF: 920-928.2-MHz
Australian Model with Card Reader |
| Part Number |
Description |
| RF1300-AUST-MS |
ImpactManager RF with Australian Radio
(920-928.2 MHz) with Magnetic Strip card reader |
| RF1300-AUST-IR |
ImpactManager RF with Australian Radio
(920-928.2 MHz) with Infrared Barcode Card Reader |
| RF1300-AUST-PR |
ImpactManager RF with Australian Radio
(920-928.2 MHz) with Proximity Card Reader |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (vertical or horizontal)
you require. Uses a Standard ImpactManager Card Reader Software Kit and an
Australian Model (920 - 928.2-MHz) Base Station.
ImpactManager RF: 920-928.2-MHz
Australian Model Base Station/Antenna |
| Part Number |
Description |
| RF1502 |
Minimum of one base station required per
facility |
| RF1507 |
USB Base Station |
| RF10092 |
USB Base Station Antenna |
ImpactManager RF:
Wi-Fi 802.11b Model
ImpactManager RF: Wi-Fi 802.11b
Model |
| Part Number |
Description |
| RF1302 |
ImpactManager RF with Wi-Fi - 802.11b
Radio |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (Vertical or horizontal)
you require. Each unit includes 3 green driver keys free of charge. Uses a
Standard ImpactManager Software Kit.
ImpactManager RF: Wi-Fi 802.11b
Model with Card Reader |
| Part Number |
Description |
| RF1302-MS |
ImpactManager RF with Wi-Fi - 802.11b
Radio with Magnetic Stripe Card Reader |
| RF1302-IR |
ImpactManager RF with Wi-Fi - 802.11b
Radio with Infrared Barcode Reader |
| RF1302-PR |
ImpactManager RF with Wi-Fi - 802.11b
Radio with Proximity Card Reader |
* When ordering, please specify
sensor type (A, B or M) and the mounting orientation (Vertical or
horizontal). Uses a Standard ImpactManager Card Reader Software Kit.
ImpactManager RF: Access Point:
Wi-Fi 802.11b |
| Part Number |
Description |
| RF10062 |
Access Point (Wi-Fi - 802.11b) Only required if no existing Wi-Fi network in place. |
ImpactManager
Software and Upgrade Kits
ImpactManager Software Kit |
| Part Number |
Description |
| RF1400-II |
Includes: Software CD, 5 Green Driver Keys, 1 Red Key, 1
Yellow Key, 1 Blue Key, 1 Black Key, 1 Microlan Cable, 1 Parallel Port
Adapter, 1 Serial Port Adapter, 1 USB Port Adaptor Kit. One software kit
required per facility. |
| RF1400-USB |
Includes: Software CD, 1 USB Port Adapter Kit, 1 Red Key, 1
Yellow Key, 1 Blue Key, 5 Green Driver Keys, 1 Black Key, 1 Microlan Cable, One software kit
required per facility |
ImpactManager Card Reader
Software Kits |
| Part Number |
Description |
| RF1400-MS |
ImpactManager RF Software Kit with Magnetic Stripe
Card Reader |
| RF1400-IR |
ImpactManager RF Software Kit with Infrared Barcode
Card Reader |
| RF1400-PR |
ImpactManager RF Software Kit with Proximity Card
Reader |
* Each software kit includes 5
green driver keys free of charge.
ImpactManager RF Upgrade Kits |
| Part Number |
Description |
| RF1500 |
ImpactManager RF 900 MHz. Includes circuit board,
lid assembly, EMI filter, panel mount assembly |
| RF1506 |
USB Base Station- One unit required per facility
|
| RF1504 |
ImpactManager RF Wi-Fi 802.11b Upgrade Kit. Upgrade
to ImpactManager RF Wi-Fi 802.11 Model. Includes circuit board, lid
assembly, EMI filter, panel mount & external buzzer assembly. |
* When ordering, please specify
sensor type (A, B or M) and Mounting Orientation (vertical or horizontal).
Must return the old circuit board and lid assembly, call 1-800-466-0101 for a
Return Authorization Number before returning product.
ShockWatch Extended Warranty
| IMSCX1 |
SC Hardware Additional one year Warranty |
| IMSCX2 |
SC Hardware Additional two year Warranty |
| IMSCX3 |
SC Hardware Additional three year Warranty |
| IMIDX1 |
ID Hardware l one year Warranty |
| IMIDX2 |
ID Hardware Additional two year Warranty |
| IMIDX3 |
ID Hardware Additional three year Warranty |
| IMRFX1 |
RF Hardware Additional one year Warranty |
| IMRFX2 |
RF Hardware Additional two year Warranty |
| IMRFX3 |
RF Hardware Additional three year Warranty |
Replacement Parts
ShockWatch ImpactManager SC
(formerly Shockswitch SC)
ImpactManager SC (SC1000,
SC1010, SC1040, SC1060, SC1080) |
| Part Number |
Description |
| MG3506 |
9-Volt Lithium Battery |
| SS10026 |
Key Switch |
| SS10061 |
Key Switch Dust Cover |
| SS10048 |
Barrel Key |
| SS1011 |
Test Switch |
| SS1012 |
Test Switch Boot |
| SS1199 |
Printed Lid |
| SS1029 |
5-Amp Fuse |
| SS1246 |
Heater Assembly |
| SS11017 |
SC1080 Remote Panel Assembly |
Relays |
| Part Number |
Description |
| SS10076 |
12-Volt External Relay |
| SS10077 |
24-Volt External Relay |
| ID11029 |
36-Volt External Relay Assembly |
| SS10078 |
48-Volt External Relay |
Miscellaneous Accessories |
| Part Number |
Description |
| SS1107 |
Bracket with Adhesive |
| SS10019 |
Adhesive (per inch) |
| SS10033 |
Replacement SC Alarm |
| SS11032 |
Adjustable Bracket |
| SS11033 |
Tamper Proof Screw |
| SS11034 |
Tamper Proof Key |
| SS1199 |
SC Replacement Lid with Label |
ImpactManager ID
ImpactManager ID (formerly SSID) |
| Part Number |
Description |
| RF1021 |
ID Enclosure Assembly |
| ID11019 |
ID Panel Mount Assembly (prior to serial #11.054493) |
| RF11036 |
ID Panel Mount Assembly (serial #11.054493 &
later) |
| ID11014 |
ID Lid Assembly |
| ID11008 |
Alarm Assembly |
| SS1246 (Factory Install Only) |
Heater Assembly (prior to serial #11.054493) |
| ID11011 |
ID Board Assembly* |
| SS11004 |
A Sensor (.5 to 3G) |
| SS1175 |
B Sensor (1 to 7G) |
| SS11022 |
M Sensor (.3 to 2G) |
| ID10020 |
5-Amp Fuse |
| ID10023 |
10-Amp Fuse |
| RF11027 |
Radio Jumper |
| RF12003 (Factory Install Only) |
Heater Assembly (serial #11.054493 and later) |
| ID10704 |
2-Amp Fuse |
| ID11049 |
User Interface Cable Extensions |
*When ordering a board assembly,
please specify sensor type (A, B or M) and the mounting orientation (vertical
or horizontal) you require.
ImpactManager RF
ImpactManager RF: 900-MHz Model
(formerly RFID) |
| Part Number |
Description |
| RF11033 |
RF Enclosure Assembly |
| RF11036 |
Panel Mount Assembly |
| RF10002 |
Power Line Filter (EMI Filter) |
| RF11003 |
RF Lid Assembly (900-928.2 MHz) |
| ID11008 |
Alarm Assembly |
| RF10010 |
Antenna (900 MHz) |
| RF11006 |
External Antenna Mounting Kit |
ImpactManager RF: 920 – 928.2-MHz Australian Model |
| Part Number |
Description |
| RF11036 |
Panel Mount Assembly |
| RF10052 |
Power Line Filter (EMI Filter) |
| RF11008 |
RF Lid Assembly (Australian 920-928.2 MHz) |
| ID11008 |
Alarm Assembly |
| RF10010 |
Antenna (900 MHz) |
| RF11006 |
External Antenna Mounting Kit |
| RF11002 |
RFID Control Radio |
| RF11004 |
RFID Lid Harness |
ImpactManager RF
(formerly Shockswitch RFID)
ImpactManager RF: 2.4-GHz Model
(formerly RFID) |
| Part Number |
Description |
| RF10021 |
RF Enclosure Assembly |
| RF11036 |
Panel Mount Assembly |
| RF10052 |
Power Line Filter (EMI Filter) |
| RF11024 |
RF Lid Assembly (2.4 GHz) |
| ID110014 |
Alarm Assembly |
| RF10060 |
Antenna (2.4 GHz) |
| RF11006 |
External Antenna Mounting Kit |
ImpactManager RF: Wi-Fi 802.11b
Model (formerly RFID) |
| Part Number |
Description |
| RF11034 |
RF Enclosure Assembly (Wi-Fi - 802.11b) |
| RF11036 |
Panel Mount Assembly |
| ID11008 |
Alarm Assembly |
| RF10052 |
Power Line Filter (EMI Filter) |
| RF11030 |
RF Lid Assembly (Wi-Fi - 802.11b) |
| RFH1016 |
2.4GHz whip antenna for use as 802.11 Antenna |
| RF11014 |
802.11 Alarm and Cable |
ImpactManager RF - Board
Assembly and Related Parts (formerly RFID) |
| Part Number |
Description |
| RF11032 |
RF Board Assembly* |
| SS11004 |
A Sensor (.5 to 3G) |
| SS1175 |
B Sensor (1 to 7G) |
| SS11022 |
M Sensor (.3 to 2G) |
| ID10104 |
2-AMP Fuse |
| ID10020 |
5-Amp Fuse |
| EP1200(A, B or M) |
Remote Sensor |
| ID10023 |
10-Amp Fuse |
| RF12003 |
RFID Heater Assembly |
*When ordering a board assembly, please specify sensor type (A, B or M) and the mounting orientation (vertical or horizontal) you require.
ImpactManager RF: Base Stations
and Access Points (formerly RFID) |
| Part Number |
Description |
| RF1501 |
Standard Base Station |
| RF1502 |
Standard Base Station |
| RF1505 |
RF Base Station/Antenna (2.4 GHz) |
| RF10062 |
Wi-Fi Access Point (airPoint 802.11b) |
| RF1506 |
USB 900-MHz base station |
ImpactManager ID and RF
(formerly SSID and RFID) - Common Parts
Miscellaneous Parts |
| Part Number |
Description |
| SS1107 |
Bracket with Adhesive |
| SS10019 |
Adhesive (per inch) |
| SS11032 |
Adjustable Bracket |
| SS11033 |
Tamper Proof Screw |
| SS11034 |
Tamper Proof Key |
|---|
| ID10091 |
External Relay (12 volt automotive) |
|---|
| RF10076 |
Filter Block |
|---|
| RF10084 |
USB to DB9 Ad |
|---|
| RF10067 |
Microprox Tag |
|---|
| RF10064 |
Time Delay Relay |
|---|
| RF10065 |
Proxcard 11 |
|---|
| RF10066 |
RFID Ethernet Base Station |
|---|
| RF10083 |
ASUS Wireless Card |
|---|
| ID11008 |
ID Alarm Assembly |
| RFH1026 |
In-Line Fuse Holder |
| SS1017 |
#307 Safety Seal |
| SS1018 |
#303 Safety Seal Wire |
| SS1088 |
PC Board Mounting Screw |
| SS1107 |
Bracket with Adhesive |
Reader Port Cables |
| Part Number |
Description |
| ID11003 |
User Interface Port Cable |
|---|
| ID11015 |
IR Barcode Reader Port Cable |
|---|
| ID11016 |
Magnetic Stripe Reader Port Cable |
|---|
| ID11023 |
Proximity Reader Port Cable |
|---|
| ID11021 |
Touch and Hold Reader Port Cable (use with ACID
only) |
|---|
iButton Keys \ Swipe Cards \
DataRanger |
| Part Number |
Description |
| ID11000 |
Green Operators Key |
|---|
| ID11001 |
Red Configuration Key |
|---|
| ID11002 |
Yellow Managers Key |
|---|
| ID11013 |
Blue Maintenance Key |
|---|
| ID11018 |
Black Reset Key |
|---|
| ID10055 |
Barcode Card |
|---|
| ID10056 |
Magnetic Stripe Card |
|---|
| RF10061 |
Barcode Label |
|---|
| DR12001 |
DataRanger w/ Cable Assembly |
|---|
| DR11001 |
DataRanger Cable |
|---|
Software & Software Kits |
| Part Number |
Description |
| RF10029 |
Shockmate Software CD |
|---|
| RF1400-II |
Includes: Software CD, 1 Red Key, 1 Yellow Key, 1
Blue Key, 1 Black Key, 1 Microlan Cable, 1 Serial Port Adapter, 1 Parallel
Port Adapter, 1 USB Port Adaptor Kit |
|---|
| RF1400-MS |
ImpactManager Software Kit with Mag. Stripe Card
Reader |
|---|
| RF1400-IR |
ImpactManager Software Kit with IR Barcode Card
Reader |
|---|
| RF1400-PR |
ImpactManager Software Kit with Proximity Card
Reader |
|---|
Software and Computer Parts |
| Part Number |
Description |
| AR1031 |
Microlan Cable - (Blue Dot iButton Key Reader ) |
|---|
| AR1032 |
Parallel Port Adapter (25-pin pass-through adapter) |
|---|
| ID10052 |
Serial Port Adapter (9-pin com. port adapter) |
|---|
| ID10039 |
IR Barcode Reader for the PC |
|---|
| ID11024 |
Proximity Reader Assembly for the PC |
For more information on any of our products or parts, please contact
us.
