Impact and Environmental Recorders Product Specifications
- ShockLog 298
- ShockLog 298 Factory Fit
- ShockLog 298 Accessories
- ShockLog 248
- ShockLog 208
- ShockLog 248 & 208 Factory Fit
ShockLog 298 Product Specifications
| Operating Temperature Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Size | 4.8" / 123mm x 3.1" / 78mm x 2.2" / 55mm |
| Weight | 1.1lbs / 515g (without battery) |
| Battery | 2 x 3.6V Lithium Thionyl Chloride 2 x 1.5V Alkaline Size AA |
| Scale Factor Accuracy at 5G | +/- 2% |
| Additional Error Other Ranges | +/- 2% |
| Acceleration Range | +/- 1 to +/- 200G |
| Cut-off Frequency Options (Programmable) | 10Hz, 40Hz, 50Hz, 90Hz, 120Hz, and 250Hz |
| Wake-up, Warning and Alarm Threshold (% of Range) |
5–95% |
| Wake-Up Time | 0.25mS |
| External Power Source Option | 4.5V min / 30V max |
ShockLog 298 Factory Fit Specifications
Humidity / Temperature Specification
| Temperature Measuring Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Temperature Accuracy | -2 / 2°C |
| Humidity Measuring Range | 0 - 100% RH |
| Humidity Accuracy | -3 / 3% RH |
| Dew Point Measuring Range | -40°F / -40°C to 185°F / 85°C 0-100% RH |
| Dew Point Accuracy | -2 / 2°C |
RF Specification
| Operating Frequency | 2.4GHz |
|---|---|
| Max Output Power | Up to +10dBm |
| Receiver Sensitivity (PER 1%) | Up to -100dBm |
| RF Data Rate | 250,000bps |
| Pocket Data Rate | Up to 125kbaud |
RF Base Specification
| Radio | ZigBee Module |
|---|---|
| Transmission Frequency | 2.4GHz |
| Transmission Distance | Up to one mile |
| Power Levels | 10mW (10dB) |
| Data Transmission Rates | 115,200 baud |
GPS Specification
| Sensitivity | 157dBm re-acquisition 148dBm cold starting |
|---|---|
| Fast TTFF | 1s / 29s (Hot/Cold start) |
| Channels | 65 |
| Hypothesis testing per second | 8,000,000 time-frequency |
| High Accuracy Position | 2.5m CEP Velocity 0.1m / sec |
Tilt & Roll (Internal) Specification
| Tilt Range Monitored | + / - 180° |
|---|---|
| Resolution | 0.1° |
| Transverse Sensitivity | 5% |
ShockLog 298 Accessory Specifications
HPT Environmental Sensor Specification
| Temperature Measuring Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Temperature Accuracy | -2 / 2°C (1 bar unit) -4 / 4°C (2 bar unit) |
| Humidity Measuring Range | 0 - 100% RH |
| Humidity Accuracy | -3 / 3% RH (1 bar unit) -6 / 6% RH (2 bar unit) |
| Pressure Measuring Range | 0 - 1.1 bar (standard) 0 - 2.1 bar (optional) |
| Pressure Accuracy | -10 / 10 Mbar (1 bar unit) -60 / 60 Mbar (2 bar unit) |
eTrak Specifications
| Operating Temperature Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Size | 6.3" / 160mm x 9.8" / 250mm x 1.6" / 40mm |
| Weight | 1.53 lbs / 696g |
| Regions | Global provided GSM network coverage available |
ShockLog 248 Product Specifications
| Operating Temperature Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Size | 3.3" / 84mm x 3.3" / 84mm x 2.2" / 55mm |
| Weight | 1.1lbs / 445g (without battery) |
| Battery | 1 x 3.6V Lithium Thionyl Chloride 1 x 1.5V Alkaline Size AA |
| Battery Life | 12 months |
| Scale Factor Accuracy at 5G | +/- 2% |
| Acceleration Range | +/- 10G, +/- 30G, +/- 100G |
| Cut-off Frequency Options (Factory Set) | 40Hz, 90Hz, and 250Hz |
| Wake-up, Warning and Alarm Threshold (% of Range) | 5–95% |
| Wake-Up Time | 0.25mS |
ShockLog 208 Product Specifications
| Operating Temperature Range | -40°F / -40°C to 185°F / 85°C |
|---|---|
| Size | 3.3" / 84mm x 3.3" / 84mm x 2.2" / 55mm |
| Weight | 1.1lbs / 445g (without battery) |
| Battery | 1 x 3.6V Lithium Thionyl Chloride 1 x 1.5V Alkaline Size AA |
| Case Material | Aluminum |
| Acceleration Range | +/- 10G, +/- 30G, +/- 100G |
| Cut-off Frequency Options (Factory Set) | 40Hz, 90Hz, and 250Hz |
| Time Slot Length | 10 seconds to 1 hour |
ShockLog 248 & ShockLog 208 Factory Fit Specifications
Humidity/Temperature Specification
| Humidity | 0-100% RH |
|---|---|
| Temperature | -40°F / -40°C to 185°F / 85°C |
| Dew Point | -40°F / -40°C to 185°F / 85°C 0-100% RH |
